Hydrogen Fuel Cell Catalyst Coating Hydrogen Fuel Cell Catalyst Coating - Ultrasonic Coating Systems - Cheersonic Hydrogen can be used as the primary fuel in an internal combustion engine or in a fuel cell. A hydrogen internal combustion engine is similar to that of a gasoline engine, where hydrogen combusts with oxygen in the air and produces expanding hot gases that directly move the physical parts of an engine. The [...]

Quiche Cutting Quiche Cutting - Ultrasonic Cutting Machine - Cheersonic Quiche is a small and simple dish that knows no borders. The name quiche comes from our beloved crossings of the Rhine, where the word means cake. Quiche is a traditional French oven-baked dish made from eggs and milk or whipped cream. The crust is usually blind-baked before other ingredients are added. Cooked meat, vegetables or cheese are mixed into [...]

GDLs Catalyst Coating GDLs Catalyst Coating - Ultrasonic Coating Systems - Cheersonic Nowadays, proton exchange membrane (PEM) fuel cells have emerged as one of the top candidates to replace the internal combustion engine in transportation vehicles. PEM fuel cells are well equipped to handle this role as they have quick startups, low operational temperatures, high efficiencies, and produce only water and heat as byproducts. To be accepted as a replacement [...]

Paper Insertion and Cutting of Layer Cake Cheersonic specializes in the production of ultrasonic cake cutting machines, frozen thousand-layer cake cutting and inserting paper, thousand-layer cake cutting with cardboard # Paper Insertion and Cutting of Layer Cake #cake inserting paper #ultrasonic cake cutting machine About Cheersonic Cheersonic manufactures the leading portioning equipment for bakeries producing fresh and frozen desserts. Since 1998 bakers have used Cheersonic machines to cut, slice and [...]

Solid Oxide Fuel Cells Catalyst Coating Solid Oxide Fuel Cells Catalyst Coating - Ultrsonic Nozzle - Cheersonic Fuel cells are recommended because of their high efficiency, low environmental footprint and attractive technology for the direct conversion of fuel to electricity. Although hydrogen is considered as an ideal fuel, there exist problems associated with its production, storage and transportation. Several alternative fuels such as hydrogen, biogas, bio-ethanol and bio-methanol can be [...]

Fuel Cells Coating Process The Fuel Cells Coating Process is a major challenge for fuel cell developers and manufacturers. Many of the coating materials used in fuel cell manufacturing are suspensions containing solid particles, such as precious metals, carbon and ceramics. These materials are often expensive and traditional coating processes such as spin coating, high pressure spraying and dip coating are more wasteful and add to the cost. Because of [...]

Casolet Cheese Cutting Casolet Cheese Cutting - Cheese Portioning Machines - Cheersonic Casolet, it is a typical mountain cheese with raw, tender and traditional whole milk, strongly identifying with the production valleys. Years ago it was produced only in autumn, when the herds had already descended from the mountain pastures: it was the cheese “at home” by tradition, made for the family. The name has a Latin origin: it derives [...]

Glass Fibre Soldering Glass Fibre Soldering - Ultrasonic Soldering Iron - Cheersonic Glass fibre is an excellent inorganic non-metallic material with a wide variety of properties. Its advantages include good insulation, strong heat resistance, good corrosion resistance, and high mechanical strength, but its disadvantages are brittleness and poor wear resistance. It is made of pyrophyllite, quartz sand, limestone, dolomite, boehmite and boehmite by high-temperature melting, drawing, winding, weaving and other [...]

Ultrasonic Spray System For Semiconductor Manufacturing Ultrasonic Spray System For Semiconductor Manufacturing - Cheersonic Based on below application, 1.Substrate: geometrical structure 2.Liquid: photoresist 3.Thickness of film: 1 µm or 1.5 µm The planar substrate can be well sprayed by ultrasonic coater. The geometric structure does not affect the spraying effect. The ultrasonic coater UEC6000L is ideal for R&D and production with spray area of 650*650mm. The thickness of the photoresist [...]

Development of Alkaline Fuel Cells Development of Alkaline Fuel Cells - Fuel Cell Catalyst Coating - Cheersonic Alkaline fuel cells without precious metal catalysts were developed years ago but these traditional alkaline fuel cells required a liquid electrolyte because they lacked a true AAEM and suffered from reliability problems because of the formation of solid carbonate in the presence of CO2. Current research on AAEM fuel cells (AAEMFCs) has shown [...]